iso 9001 6 ton lever chain hoist
"
Levé industriel de 6 tonnes à la chaîne à levier de levage de catégorie 100
6 tonne Lever Hoist VIT-II competitive Lever Hoist VIT-II with industrial performance Product Description Lever Hoist type VIT-II is manufactured by VITALI-INTL Lifting Equipment Ltd, meets all pertinent world standards. The whole series of Lever Hoist VIT-II contains 0.75 tonne, 1 tonne, 1.5 tonne, 3 tonne, 6 tonne and 9 tonne in load capacity. They are mainly exported to American and European markets. They are competitive lever hoists with industrial performance. High
1 -20 tonnes de poulie à chaîne Blocs de type CK avec chaîne à main
1tonne Chain Block K-II top-of-the-line chain block Product Description Chain Block type K-II is top-of-the-line chain block. The hoists are manufactured by VITALI-INTL Lifting Equipment Ltd, based on European and American standards. The whole series of Chain Block type K-II (top-of-the-line chain block) contains 0.25 tonne, 0.5 tonne, 1 tonne, 1.5 tonne, 2 tonne, 3 tonne, 3.2 tonne, 5 tonne, 7.5 tonne, 10 tonne, 15 tonne, 20 tonne, 30 tonne and 50 tonne in load capacity.
Bride à quatre jambes de câble métallique de GB/T 16762, bride de câble galvanisée par 32mm avec des boucles
32mm Four-leg steel wire rope slings, fibre core, swaged wire rope with Flemish Eye Sleeve and Thimble, equipped with Master Link Four-leg wire rope sling assembly, fibre core, Soft Eye and Eye Sling Description All our four-leg steel wire rope sling assemblies are produced according to our DNV Quality Management Approved System. The sling assemblies with fibre core feature 6 x 37 +FC construction, with 1670MPa in tensile strength. Each leg is a single soft eye wire rope
double bride de câble métallique de jambe de 38mm avec la douille et le dé flamands d'oeil
38mm Double-leg steel wire rope slings, swaged wire rope with Flemish Eye Sleeve and Thimble, steel core, equipped with Master Link Two-leg wire rope sling assembly, steel core Product Description Our Double-leg Wire Rope Sling Assemblies (with steel core) feature 6 x 37 (a) + IWRC Construction, with 1770MPa in tension strength. The wire ropes with soft eye are swaged, which means that the end has been folded back on itself, and spliced into the rope. An eye on its own is
1,3 bride simple de câble métallique de jambe de la tonne 12mm, bride molle de câble métallique d'oeil
12mm Single leg steel wire rope slings, fibre core, swaged wire rope with Flemish Eye Sleeve and Thimble, equipped with Master Link Single leg wire rope sling assembly, fibre core, Soft Eye and Eye Sling Product Description We are supplying Single Leg Wire Rope Sling Assemblies (with fibre core) that comply with EN 13414-1: 2003, EN 13411-3: 2004, GB/T 16762-2009, GB/T 14737-2009 requirements. The wire rope slings feature 6 x 37 Construction, Extra Improved Plow Steel (EIPS)
8 élingue équipée de câble métallique de la tonne DNV 2.7-1, bride de câble métallique de 4 jambes
8 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set Offshore Container are mainly used on offshore oil platforms. They are much different with normal ISO container. Not only because strict safety requirements have to be met, but also because they are mainly transported by small ship and lifted / unloaded by crane. When DNV revised the DNV 2.7-1 Certification Note, the
Câble métallique étampé de noyau en acier doux de l'oeil 30mm d'en 13411-3
30mm Swaged wire rope sling, steel core, soft eye, can be equipped with Flemish Eye Sleeve or Aluminium Ferrule and Thimble Standard Eye and Thimble Eye Wire Rope Sling, steel core Product Description Our Swaged Wire Rope Slings with steel core feature 6 x 19, 6 x 37 or 8 x 61 Construction, Extra Improved Plow Steel (EIPS) wire rope with an Independent Wire Rope Core (IWRC). Soft Eye Wire Ropes can be hand spliced at either end, or mechanically pressed and secured with a
l'élingue équipée de câble métallique de 12mm, main a épissé la bride de câble métallique
12mm Hand Spliced Wire Rope Sling, steel core, can be equipped with Thimble Standard Eye and Thimble Eye Wire Rope Sling, steel core Product Description A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications. Our
élingue équipée de câble métallique de 50mm avec la prise ouverte de Spelter
50mm Wire Rope Sling with Open Spelter Socket (with cotter pin), long-term durability Wire Rope Sling and Wire Rope End Fittings Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. This type of end fittings for wire rope sling is made depending on the specific
