Arrêt d'extrémité de câble métallique

TALURIT® aluminium ferrule UM (Ultragrip™) smaller in diameter after pressing than TALURIT® T ferrule Product Description The UM ferrule become smaller in diameter after pressing than the T ferrule. For economic reasons, the UM ferrule can be used as an alternative to the T ferrule at wire rope grades, up to and including 1960. The UM ferrule are available from stock in sizes from 09-90. Art. No: UM 09 – UM 90 The aluminium ferrule UM (Ultragrip™) are made from a special

TALUKON™ Ferrule Aluminum Ferrule, a conical ferrule made for sling application Product Description TALUKON™ is a conical ferrule made for sling application. It has an inspection hole to ensure the short end of the wire rope is correctly positioned after pressing. It also has a very tight fit compared to other conical ferrules on the market. The wire rope termination will not get caught during lifting and will simply slide of an obstacle. This will minimize the risk of

TALURIT® T / TS Aluminium Turnback Ferrule Product Description The ORIGINAL in mechanical splicing! The T aluminium turnback ferrule system is easy and reliable to use. It is quick, safe and has proved itself to be totally reliable. It is far more efficient than all other swaging methods on the market. Art. No: T 01 – T 152 The TALURIT T-ferrule is the original in mechanical splicing and has laid the grounds for the European standard. Nowadays, the T-ferrule correspond to the

7/8" Stainless Steel Threaded Swage Stud, Terminals for Wire Rope, long-term durability Wire Rope End Fittings Description Our Threaded Swage Stud are designed to be swaged or crimped into position.They are used to allow tightening of cable assemblies to specific tensions. Available in left- or right-handed thread. Metric threads available upon request. The Threaded Swage Studs are forged from high tensile stainless steel, while galvanization ensures its long-term durability.

1" Open Swage Socket (with cotter pin), End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Open Swage Socket is an open type swage socket with a spring pin. The socket is forged from high tensile steel, while galvanization ensures its long-term durability. The Open Swage Socket is available for wire rope with a diameter from 6.35mm to 50.8mm. - Reference standard: ASME B30.9 - Our Swage Sockets are recommended used for wire ropes feature 6 x 19

3/4" Closed Swage Socket, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Our Closed Swage Socket is forged from high tensile steel, while galvanization ensures its long-term durability. The Closde Swage Socket is available for wire rope with a diameter from 1/4" to 2". - Reference standard: ASME B30.9 - Our Swage Sockets are recommended used for wire ropes feature 6 x 19, 6 x 25, 6 x 37 construction, with tension strength ranging from 1670

TALURIT® Round Aluminium End Stops made of Aluminium alloy not used for lifting Product Description Ends stops (R) are not allowed to use for lifting applications. The expected strength regarding this end-termination is approximately 50% of the MBL of the wire rope (informative only). Accordingly, verifying tests must be performed to secure the strength of the application. Art. No: R 01,5 – R 32 The R end stop is a round end stop made of Aluminium alloy, AW-5051A, same as for

T-LOC™ Steel Reinforcement Ring made from carbon steel and swaged together with a standard turnback ferrule Product Description T-LOC™ is a reinforced aluminium termination. It prevents the aluminum ferrule from splitting, especially when using a heavy duty thimble. It is approved for wire ropes of grade 2160. T-LOC™ is made from carbon steel and swaged together with a standard turnback ferrule, type T. Art. No: T-LOC 10 – T-LOC 66 Patent pending: Application no. PCT/SE2010

TALURIT® Copper Turnback Ferrule (TCU) used with stainless steel wire rope to avoid galvanic corrosion Product Description Copper ferrules are intended as an alternative to Stainless steel ferrules in high corrosive environments. The ferrule is to be used with stainless steel wire rope to avoid galvanic corrosion. The copper ferrule (TCU) is intended for stainless steel wire rope in corrosive environment. It is a good alternative to stainless steel ferrules is where there is